• MAXMESH
  • MAXMESH
  • MAXMESH
  • MAXMESH

MAXMESH

£59.40inc VAT£49.50ex VAT

box

Dispatched within:
1 Working Day

Find a Stockist

Find a nearby stockist to access our full range of products.

Find a Stockistarrow
Become a Distributor

Learn how to join our network and grow your business with MAXAM.

Become a Distributorarrow
product OVERVIEW

MAXMESH is a light gauge galvanised steel wire mesh for closing off pest entry points across the building envelope. Supplied as a 6m x 0.9m roll, it cuts and bends to fit gaps, vents and awkward contours, and fixes quickly with DURA+ sealant/adhesive or standard mechanical fixings. It's a fast, low-cost option for planned and reactive pest prevention work on social housing stock.

Key Features

  • Supports Awaab's Law Stage 2 Compliance - helps close pest entry points as part of a documented damp, mould and hygiene programme.
  • Cuts to Size with Wire Snipping Scissors - no specialist tools needed, trim on site to fit any gap.
  • Bends to Fit Contours - shapes by hand around pipework, eaves, air bricks and irregular openings for a tight seal.
  • Fixes in Minutes - apply with DURA+ sealant/adhesive (or similar) for a fast bonded fix, or fit mechanically with screws, clips or staples.
  • Wide Range of Applications - suitable for use across most building and roofing surfaces as part of a pest exclusion strategy.

 

How to Fit MAXMESH

  1. Measure the gap or opening, allowing enough spare mesh to overlap the edges by at least 20-25mm.
  2. Wearing suitable gloves, cut MAXMESH to size with wire snipping scissors or tin snips.
  3. Shape the mesh by hand to follow the contour of the surface, pipework or opening.
  4. Make sure the surface is clean, dry and free of debris before fixing.
  5. Fix in place with a bead of DURA+ sealant/adhesive (or a similar suitable product) around the edges of the mesh, or fix mechanically with screws, clips or staples where the substrate allows.
  6. Check the finished fit for gaps around the edges and at any overlaps, and trim or re-fix as needed.

Cut ends can be sharp, so gloves are recommended when handling and fitting MAXMESH.

 

Applications

MAXMESH is suitable for use across a wide range of building and roofing surfaces, including:

  • Eaves, soffits and roof verges
  • Air bricks and vents
  • Pipe and cable entry points
  • Underfloor and subfloor openings
  • Boundary and party wall gaps

As part of a wider pest exclusion strategy, MAXMESH works well alongside sealed vent covers and treatment products to close off the routes pests use to get into a property.


technical specification

Product Code

06100

Size

6m x 0.9m roll (5.4m² coverage)

Material

Mild steel wire, galvanised finish

Mesh Aperture

1/4" x 1/4" (6mm x 6mm)

Wire Gauge

23g (0.63mm)

Weight

Approx. 4.2kg per roll*

Colour

Galvanised silver

Cutting

Wire snipping scissors / tin snips

Fixing

DURA+ sealant/adhesive or mechanical fixings

you might also be interested in...
Follow us